01. SonyEricsson T28 / T68 / K600 RJ45 02. SonyEricsson K750 RJ45 03. SonyEricsson J132 / X1 RJ45 04. LG SEMC U8110 RJ45 05. Siemens C62 RJ45 with tweezers 06. Sharp 902 3G RJ45 with tweezers 07. LG SEMC A2 KU580 / KF750 / KF755 / KS500 / KT520 USB 08. SonyEricsson GDFS Repair with tweezers and needles 09. USB-A -> USB-B
This product contains original device, which means complete original mother board (PCB) and original casing, but without official sim-card.
It is designed to update your previous version of your box or device to the last edition, while retaining your official SIM card.
It is also very useful when your official SIM card is still operating and is active, but the hardware of your box or device that has failed being out of warranty.
In this case you can replace the hardware box and released as if it were a new without having to buy the product again. By this way, you will profit your original card and cables you already have in your hands, thus avoiding having to duplicate unnecessary costs.
Please note that if your official SIM-card has extra activations and/or added services locked to your ID or serial number, you will not lose them and you will continue enjoying and containing all the services and activations as the old one.
New Account or Refilling of 30 logs for SETool Box 3
Credits/logs Accounts for SETOOL 3 Box (Metal or Plastic) that can be used to unlock phones and/or activate the new v1.x software versions in your Box and therefore get access to the Official Support. Note that the activation for v1.x discounts 20 credits, so if you buy 30 credits, will be 10 credits left in your account to be able to use them in the future.
Set of 4 BOOT Repair and Unlocking cables for SE Tool 3 Box & 4SE Dongle
Special resurrection cables for unlocking without flashing cellphones to Android v2.1! Also are valid for service and repairing with easy and in a safe way the damaged simlock or dead boot of SonyEricsson Xperia phones with QUALCOMM Chipset with SETool 3 Box & 4SE Dongle! No need to solder or remove anything, moreover there is no need to make testpoint!
SE Tool 3 Box TestPoint Cable Box
TestPoint Cable for SE Tool 3 Box, Cruiser Pro Box, Sony Ericsson Servers, etc ... With this cable you can revive the GDFS area and also write and make a complete an EEPROM rebuild of Sony Ericsson phones are which are dead, not powering up phones and even phones which cannot connect with any device!